Maintenance of Concrete Batching Machine
Feldspar has certain applications in gemstones and industry. In the industrial sector, albite is mainly used in the manufacture of ceramics, soaps, ceramic tiles, floor tiles, glass, abrasives and the like. In terms of gems. Because of its “moonlight effect”, it has also been widely used.
However, the data show that the hardness of feldspar fluctuates between 6 and 6.5, the specific gravity fluctuates between 2 and 2.5, is brittle, has high compressive strength, and has strong chemical stability to acid. Therefore, the Concrete Batching Machine Special mechanical equipment must be used for processing. For example, Concrete Batching Machines, Concrete Batching Machines have high-quality performance, and Concrete Batching Machines have a wide range of processing, and can be used for various non-flammable and explosive minerals with a hardness below 6% of Mohs’s humidity below 6%. The material, therefore, has been recognized in the processing of feldspar.
However, good mechanical properties need to be maintained. Below, please come to the maintenance center to carry out certain maintenance on the Concrete Batching Machine.
For the parts of the Concrete Batching Machine, the user must not be able to handle the maintenance of the Concrete Batching Machine, especially the part of the bearing. Bearings have a large impact, so when using the Concrete Batching Machine, you must pay attention to this aspect of the Concrete Batching Machine. The maintenance of the bearing can be divided into two parts, lubrication maintenance and timed cleaning. In doing this, the stability of the Concrete Batching Machine is well maintained.
Many users often report that their equipment is not stable enough, because they do not pay attention to this aspect of maintenance. Lubrication enables the Concrete Batching Machine to maintain good performance and maintain high performance. But the lubricant must be cleaned, and the cleaned lubricant can achieve the effect. At the same time, for machine inspection, cleaning can hinder the rust of the Concrete Batching Machine and prolong its service life.
In addition to care and maintenance, pay attention to the feed of the Concrete Batching Machine. If you want to maintain stability, you must pay attention to the feed of the Concrete Batching Machine. Feeding should not be excessive. Once it is excessive, the internal function of the Concrete Batching Machine will be impaired, which will affect the stability of the Concrete Batching Machine. Therefore, the amount should be controlled, but it is not a small amount of addition; it is not too little, otherwise Affect efficiency.
Welcome to the maintenance center of the Concrete Batching Machine, I hope your equipment is as good as ever.