Small Scale Iron Ore Processing Equipment

Small Scale Iron Ore Processing Equipment

Small Scale Iron Ore Processing Equipment routine maintenance

        

1. Daily inspection work

        
        

In the process of grinding the Small Scale Iron Ore Processing Equipment, daily routine inspection of the Small Scale Iron Ore Processing Equipment is required, which is called daily inspection. The daily inspection work of the Small Scale Iron Ore Processing Equipment mainly refers to checking whether the Small Scale Iron Ore Processing Equipment is operating abnormally during the operation of the Small Scale Iron Ore Processing Equipment, and checking whether there is any leakage around the reducer at the lower part of the Small Scale Iron Ore Processing Equipment, inspection and control Whether the sealing of the hydraulic rod between the grinding disc and the grinding roller of the Small Scale Iron Ore Processing Equipment is good, check whether the scraper in the Small Scale Iron Ore Processing Equipment is working normally, and check whether the working stations of the Small Scale Iron Ore Processing Equipment are working normally.

        
        

The above daily inspection work is mainly to ensure the normal operation of the Small Scale Iron Ore Processing Equipment. The Small Scale Iron Ore Processing Equipment will have a certain frequency of vibration and noise during normal operation, and abnormal when the Small Scale Iron Ore Processing Equipment is abnormal. Noise, which means that the user needs to stop the inspection. The lubrication device of the Small Scale Iron Ore Processing Equipment and the adjustment device of the Small Scale Iron Ore Processing Equipment are all realized by hydraulic devices. Therefore, in the Small Scale Iron Ore Processing Equipment, it is necessary to check in time whether the hydraulic device in the Small Scale Iron Ore Processing Equipment has oil leakage and timely solve.

        
        

2, preventive maintenance

        
        

The preventive maintenance of the Small Scale Iron Ore Processing Equipment mainly refers to a series of maintenance and inspection work carried out before the Small Scale Iron Ore Processing Equipment is started. This kind of work has the addition of lubricating oil of the Small Scale Iron Ore Processing Equipment, wear or looseness of the parts of the Small Scale Iron Ore Processing Equipment. Inspection and replacement of the equipment, inspection of the electric power of the circuit where the Small Scale Iron Ore Processing Equipment operates, circuit test, fineness of the finished product of the Small Scale Iron Ore Processing Equipment, and adjustment of the distance between components in the grinding chamber.

        
        

The Small Scale Iron Ore Processing Equipment uses a thin oil lubrication system. It is necessary to refuel the Small Scale Iron Ore Processing Equipment before starting the machine. It is necessary to ensure that the amount of lubricating oil is larger than the large one-third of the lubricating system can accommodate. The replacement of parts in the Small Scale Iron Ore Processing Equipment mainly refers to the replacement of the wear parts in the Small Scale Iron Ore Processing Equipment, because the wear parts wear very quickly, and in addition to the wear parts, such as screws in the grinding chamber, etc. It is easy to suffer from the wear and tear of the material and should be replaced in time if necessary. The Small Scale Iron Ore Processing Equipment grinds the powder material, and the fineness of the finished powder material has a certain degree of fineness. The size of this fineness can be adjusted by the user, and the size of the air volume in the system and the speed of the powder separator are adjusted. Can be achieved.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.