Limestone Dolomite Mobile Crusher

Limestone Dolomite Mobile Crusher

Limestone Dolomite Mobile Crusher production capacity

┬áThe Limestone Dolomite Mobile Crusher is a new generation of energy-saving and high-efficiency river pebble Limestone Dolomite Mobile Crusher with advanced international technology developed on the basis of many years of research, development and production of mining machinery. Various ore crushing equipment plays an irreplaceable role. This series of Limestone Dolomite Mobile Crushers can be widely used in the metal and non-metallic ore, building materials, artificial sand and various metallurgical slag crushing and shaping. The stone breaker equipment is suitable for brittle materials with a Mohs hardness of less than 9 grades, and is not suitable for viscous materials and stone materials containing more soil. Recently, the user’s reaction to the Limestone Dolomite Mobile Crusher’s production capacity has not achieved the expected results, so what is the impact of the rock crusher’s production capacity? The technical staff of our company summarized the following conclusions through practice analysis:

1. Hardness of the material: The harder the material is, the more difficult it is to make sand, and the more serious the wear on the equipment. Sand production is slow and low in ability. Therefore, we need to pay attention to the selection of materials.

2, the composition of the material: the more the fine powder contained in the material before the Limestone Dolomite Mobile Crusher, the more the sand is affected, because these fine powders are easy to adhere to affect the transport. Therefore, materials with a high content of fine powder should be sieved once in advance. The fine powder should be filtered out of the material as much as possible to avoid affecting the normal operation of the Limestone Dolomite Mobile Crusher.

3. The fineness of the material after the crushing of the Limestone Dolomite Mobile Crusher: the fineness requirement is high, that is, the finer the material required to make the sand, the smaller the sand making ability. In this regard, specific requirements are required. If there is no special requirement, the fineness of the material is generally set to medium and fine.

4, the viscosity of the material: that is, the greater the viscosity of the material, the easier it is to adhere. The material with high viscosity will adhere to the inner wall of the sand-making chamber in the Shibang Limestone Dolomite Mobile Crusher. If it cannot be cleaned in time, it will affect the working efficiency of the Limestone Dolomite Mobile Crusher. In severe cases, it may affect the normal operation of the Limestone Dolomite Mobile Crusher. Therefore, when selecting materials, it must be noted that the viscosity of the materials is not too large.

5. Humidity of material: When the moisture contained in the material is large, the material is easy to adhere in the Limestone Dolomite Mobile Crusher, and it is easy to cause blockage during the feeding process, resulting in a reduced sand making capacity. To solve this problem, firstly, the material humidity should be strictly controlled when the material is selected. If the humidity of the selected material is too large, the percentage of moisture in the material can be reduced by using sunshine or air drying.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.