Calcium Carbonate Processing Plant Cost

Calcium Carbonate Processing Plant Cost

Factors affecting the output of Calcium Carbonate Processing Machines

Calcium Carbonate Processing Machines play an important role. However, when we look at the instructions for using the Calcium Carbonate Processing Machine, we will always indicate how many grades of powder can be powdered. The moisture requirement must be less than a few percent. So, what effect does the moisture of the stone have on the finished product of the Calcium Carbonate Processing Machine?

First of all, when we use the Calcium Carbonate Processing Machine to process the stone material, if the material moisture is too large, it is easy to form the powder adhered to the grinding roller mill during the process of grinding the powder by the grinding roller. Between the rings. Thus, as the amount of adhering material increases, the pressure of the Calcium Carbonate Processing Machine and the frictional resistance of the equipment components increase accordingly. In the long run, it will not only reduce the grinding speed of the Calcium Carbonate Processing Machine, but also cause serious wear on the parts and reduce the service life of the Calcium Carbonate Processing Machine.

Secondly, in the process of processing and milling the stone by the Calcium Carbonate Processing Machine, the material is tightly pressed and ground between the grinding rolls to achieve the purpose of grinding and milling. Therefore, when the Calcium Carbonate Processing Machine is working, a lot of heat is generated in the grinding chamber. If the moisture of the stone is too large, it will cause the water to evaporate by heat, which will change the direction of the airflow in the grinding chamber. In severe cases, it may lead to low-volume or even blasting accidents.

In addition, materials of different natures have different moisture requirements when using Calcium Carbonate Processing Machine powder. Under normal circumstances, the Calcium Carbonate Processing Machine has a moisture requirement of 6% or less for the stone, because when the moisture content of the material is less than 6%, the Calcium Carbonate Processing Machine can exert a high-quality grinding effect, so that the production efficiency and the finished product The quality can be achieved. Of course, the user can perform comprehensive humidity control on the material to be ground according to the actual needs of the production.

However, if the moisture of the stone to be ground is too small, it will increase the difficulty of grinding in a particularly dry condition. At the same time, the stone material is too dry, and it is easy to produce large dust pollution in the milling and grinding. In this case, we also carry out proper watering on the inlet to prevent dust from flying. Therefore, SBM recommends that when using the Calcium Carbonate Processing Machine to grind the stone, it is necessary to properly grasp the water content of the stone according to the material characteristics and production requirements to achieve the best performance of the Calcium Carbonate Processing Machine.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.